Compact and Quiet Fine-misting Fan Aquafog® 700™ brings advanced fine-mist fogging to the relaxed atmosphere applications. Perfectly suited from growing orchids to spot cooling horses, from cooling individual sunbathers to large outdoor gatherings. If you need fine misty-fog combined with mild air propulsion for either evaporative cooling or mid-range humidification applications, the Aquafog 700 may be the right ticket. Ready to install these stand-alone units connect to ordinary water and power supplies. Not recommended for humidification applications above 80% RH For the extreme high humidity application, refer to the TurboXE Fog Fans Aquafog 700 Accessories Humidistat Controls This pre-wired humidistat is an ideal means of control for the Aquafog® 700 in all applications requiring 85% or less relative humidity. Automatically controls your Aquafog 700 for most humidification and indoor cooling applications. It incorporates a fast-acting man-made sensing element with large easy access control dial. Designed to endure high humidity levels, this control unit requires no wiring and comes supplied with a convenient pre-wired piggy-back electrical plug. XE-36 115 Volt 60Hz $102.40 XE-36-DF (For use with SS-700-DF Fan) $148.80 Thermostat Control If your primary interest is in evaporative cooling, this pre-wired thermostat control is what you may need to automate your Aquafog 700. Watertight Nema 4X enclosure works great for indoor or outdoor cooling applications. Simply dial the desired temperature setting you would like the Aquafog 700 to turn on at and this thermostat control will automate your Aquafog with a precise control of +/- 2°F. Designed to endure high humidity or outdoor conditions, this control requires no wiring and comes supplied with a convenient pre-wired piggyback electrical plug. THA-120 115 Volt 60Hz $112.00 THA-120-DF (For use with SS-700-DF Fan) $155.75 Cycle Timer Control If you want to maintain very high humid environments above 85% (RH) relative humidity, then the Cycle Timer may be the control you are looking for to automate your Aquafog 700. The watertight Nema 4X enclosure works ideal for indoor high humidity environments. The two knob control system, allows you to simply dial the desired amount of on /vs off time to set the desired cycles. The mode button lets you choose between four different time ranges from 5 to 60 minutes. Designed to endure high humidity conditions, this control requires no wiring and comes supplied with a convenient pre-wired piggyback electrical plug. CTA-120 115 Volt 60Hz $158.38 CTA-120-DF (For use with SS-700-DF Fan) $203.00 See also : Description / Specs / Sizing Calculator
	Jaybird Manufacturing, Inc. | Woskob Industrial Park | 2595-B Clyde Avenue | State College, PA 16801 USA phone: (814) 235-1807 | fax: (814) 235-1827 | email: info@jaybird-mfg.com © 2010-2014 Jaybird Manufacturing, Inc. Site Map