When applications exceed a 24-ft. wide coverage area, the TurboXE Oscillator provides a consistent (dwell-free) movement, allowing the operator to fog at higher outputs while maintaining dryness underneath. Sweeping the fog back and forth not only alleviates droplet collisions and fallout, but also enhances circulatory movement for more uniform fog coverage. TurboXE’s rotating movement is essential for hard-to-root greenhouse propagation and many odor control situations, but can also be highly beneficial in other applications that can benefit from the sweeping motion of fog and air. Combine the powerful propulsion of the TurboXE Fan with the Oscillator’s rotation to obtain a large, forced circulation coverage area up to 70 feet in diameter.

Maximum Coverage Uniform Fog Dispersion Rapid Arc Setting Manual Override

Dwell-free Design Adjusts in 3.75° Increments 96 Settings 360° Rotation in 2 Minutes

Oscillators are standard equipped with a dark green housing and epoxy encapsulated, impedence protected gear motor

Heavy Duty Mounting Supports
Easily install your Aquafog next to a solid wood or masonry wall.

The Wall Mount Support provides adjustable height along its 30" vertical length. The cross-support extends 21", accomodating 360 degree rotation.

The Ceiling Mount Support features a 36" horizontal length.

When space is limited overhead, XE Floor Stand allows near ground-level fogging for stationary or oscillating set-ups. Stands are constructed of durable thick-wall, polyethylene plastic with a structurally reinforced post and fillable base for maximum stability.

Five pre-set height locations, at 7" intervals, allow for easy height adjustments without the need for tools. Quick, easy assembly. Available in black.
Heigth: 78.5" (199.4 cm) Width: 33.5" (85.1cm) Depth: 29.5" (74.9cm)

• Five height settings
• Easy assembly
• Sleek, sturdy design

• Adjustable boom to 6’ 8”
• 35” footprint for clearance through doorways

These Floor stands are equipped with 10” semi-pneumatic wheels, a durable frame construction and a fully adjustable boom allowing for quick height adjustment. Can be easily dollied from place to place. Stands arrive pre-cut, pre-drilled and are quick to assemble. Packaged for courier (UPS) deliveries.

If your humidity requirement is 85% or under, the Humidistat Control offers the best overall control. When the humidity level drops to about 7% below the set point, the humidistat will activate to replenish the loss of humidity. If mild or strong ventiation begins, humidity can still be maintained with the added benefit of evaporative cooling.

-Capable of operating up to two 1 HP units.

These thermostats will provide accurate measurement of the temperature, automatically controlling your Aquafog unit(s) at approximately 3°F above and below your desired set point. Control units are assembled with high quality waterproof components.

TH1 Control - Capable of operating single Aquafog units up to 1 HP.
TH2 Control - Capable of operating up to two 1 HP units.

Environmental Control For High Humidity Applications And Changing Temperature Conditions
Designed with the propagator in mind, these two-stage systems will automatically adjust the amount of fog output. When the time clock starts the operation of the Aquafog unit(s), the timer will also open the first stage water solenoid, providing low fogging output in low temerature conditions (conditions where ventilation is at a minimum). When the temperature rises and more rapid ventilation begins, the thermostat opens the second stage water solenoid, providing the higher fogging output necessary to replenish the loss of humidity. Features a 24-hour raintight time clock, adjustable to cycles as short as 1/2 hour. Fours sets of on/off trippers provided. Watertight solenoids, thermostat and all brass plumbing construction.

-Capable of operating up to two 1 HP units.