Humidistat Control

If your humidity requirement is 85% or under, the Humidistat Control offers the best overall control. When the humidity level drops to about 7% below the set point, the humidistat will activate to replenish the loss of humidity. If mild or strong ventilation begins, humidity can still be maintained with the added benefit of evaporative cooling.

-Capable of operating up to two 1 HP units.

24-Hour Timer Control

Often the choice for applications when the desired humidity is above the 85% mark. Using extended cycle operations, the operator can achieve accurate control of the humidity level by manually adjusting the fluid metering valve of the Aquafog unit. Raintight housing protects a nearly all plastic inner construction. The 60 Hz timer control has adjustable cycles as short as 1/2 hour with three sets of on/off trippers provided. The 50 Hz timer control provides digital programming for up to eight on/off cycles.

-Capable of operating up to two 1 HP units.

Thermostat Control

These thermostats will provide accurate measurement of the temperature, automatically controlling your Aquafog unit(s) at approximately 3°F above and below your desired set point. Control units are assembled with high quality waterproof components.

TH1 Control - Capable of operating single Aquafog units up to 1 HP.
TH2 Control - Capable of operating up to two 1 HP units.

Two-Stage Control

Environmental Control For High Humidity Applications And Changing Temperature Conditions.
Designed with the propagator in mind, these two-stage systems will automatically adjust the amount of fog output. When the time clock starts the operation of the Aquafog unit(s), the timer will also open the first stage water solenoid, providing low fogging output in low temperature conditions (conditions where ventilation is at a minimum). When the temperature rises and more rapid ventilation begins, the thermostat opens the second stage water solenoid, providing the higher fogging output necessary to replenish the loss of humidity. Features a 24-hour raintight timer control with either adjustable cycles as short as 1/2 hour [three sets of on/off trippers provided] on the 60 Hz unit or digital programming for up to eight on/off cycles on the 50 Hz unit. Watertight solenoids, thermostat and all brass plumbing construction.

-Capable of operating up to two 1 HP units.