Turbo XE (60 Hz ) Domestic Voltage

Turbo XE Fog Fan

Turbo XE Fogging fans are superior atomizers designed for a variety of commercial and industrial applications. Turbo XEs produce billions of tiny, fog-like particles combined with powerful airflow.

The Turbo XE system uses centrifugal force atomization to produce high-quality fog without the use of nozzles, high-pressure pumps, compressed air, or filtration, eliminating the need for constant repairs and maintenance. The Turbo XE's unique atomization technology also generally results in significant energy savings over other systems under equal conditions.

This unit can either be controlled manually by the operator or controlled automatically by a humidistat, thermostat, or timer with a solenoid valve. The adjustable flow rate is controlled by a flowmeter panel, which requires a water supply of 10 to 100 PSI. Units can also be fed with a metering pump or gravity feed system.

  • Nozzle free atomization
  • Up to 34 GPH
  • Direct feed with flowmeter
  • Powerful and efficient

Attachment choice:

  • Secure double U-bolt mount
  • Convenient single-bolt universial mount
  • Easy to use positive lock pivot system with four angle settings.

Stainless Steel Frame

New stainless steel frame assembly adds features and prevents corrosion.

 

  • 100% (304) Stainless Steel

Stainless Steel Flowmeter Panel

Every Turbo XE atomizing fan comes with a choice of flowmeter panel. To maintain reliability, flowmeters need to be operated at 1/3 of their flow rate range or higher. The flowmeter size should be chosen according to the requirements of your application. Use the reference chart below to help select the right product, or use our Website‘s Sizing Calculator.

Examples based using the Turbo XE-2000 Fog Fan:

4-34 GPH

2-24 GPH

1-11 GPH

(20-300 ccm)
.3-5 GPH

(10-110 ccm)
.1-2 GPH

Horticulture

Evaporative Cooling

Concrete Curing

Mushrooms

Produce Storage

Warehouse

Mfg Plant Humidification

Wood/Lumber

Wine Storage

Textile Plant Humidification

Mfg. Dust/Static

Odor Control

The Turbo XE fogger comes standard equipped with:

Baldor® Wash-down-duty™ motor

  • Designed for use around water
  • Stainless steel shaft

Teal green housing, 12' power cord, 20' water line and 16' of drainage line. Utility line lengths may be customized during the order process.

Dimensions:

Diameter 20.5 in / 52 cm

Depth 17.5 in / 44.5 cm

Height 22.5 in / 57 cm

Propulsion Distance:

30-35 ft / 10-11 m

Noise @ 10 ft:

73 - 74 dB(A)

Average Particle Size:

5-10 microns @ low volume

25 microns @ mid volume

35 microns @ high volume

CFM:

3/4 HP - 3,200

1/2 HP - 2,700

Operation:

Continuous duty capability

Energy Consumption:

3/4 HP - 9.4 amps @ 115V
1/2 HP - 7.8 amps @ 115V

Shipping Weight:

Box 1, 19 lbs
Box 2 (3/4 HP), 38 lbs
Box 2 (1/2 HP), 32 lbs

Box Dimensions:

Box 1, 21” x 21” x 15”
Box 2, 16” x 12” x 12”

Environment:

Endures temperatures from
31° to 160° F

Indoors / outdoors

Humidity to 100% RH

UV stabilized & impact resistant

  • XE 360 Oscillator

    Increase Coverage & Circulation

    The sweeping action of a fogging unit not only alleviates droplet collisions and fallout, but also enhances air circulation. The steady, continuous movement provides for uniform coverage patterns up to 70 feet in diameter. This allows the operator to fog at higher output levels than a stationary unit operating under equal conditions, resulting in less fallout and improved dryness underneath the fog pattern.

    • 304 (18-8) stainless steel design
    • Indoor/outdoor (NEMA 3) up to 180°F
    • Adjustable sweep from 15° to 360°
    • Dwell-free movement - 180° in 95 Seconds
    • Override power switch
    • Durable 100lb capacity
    XE-360 $342.00
  • Molded Floor Stand

    Easy Set-up Floor Stand

    If securing Turbo XE Fans overhead is not practical, this floor stand allows quick, easy set-up. Capable of stationary or oscillating set-ups. Stands are molded of heavy-wall, polyethylene reinforced material.

    • Quick assembly
    • Five height settings
    • Sleek, sturdy design

    Only in Black

    XE-110 $349.00
  • Humidistat Control
    Humidistat Control

    Complete environmental control

    If your humidity requirement is 80% or less, the Humidistat Control is the best choice for control of your environment. When the humidity level drops to about 6% below the set point, the humidistat will activate the Turbo XE Fan to replenish the loss of humidity. If ventilation occurs, humidity can be restored with evaporative cooling.

    • Controls up to two Turbo XEs
    H2-120 $279.00
  • Timer Control
    Timer Control

    Excellent for controlling long operation cycles

    Often the choice for applications when humidity is desired above 80%. Using extended cycle operation, the operator can attempt to control humidity levels utilizing manual control of the flowmeter panel.

    Time cycles as short as 1 hour. Two sets of on/off trippers provided.

    • Controls up to two Turbo XEs
    TC-120 $279.00
  • Thermostat Control 1
    Thermostat Control 1

    If your main interest is evaporative cooling

    These watertight thermostats will provide accurate measurement of the temperature, automatically controlling your Turbo XE Fan(s) at approximately 3°F above and below your desired set-point.

    • Effective Range: 40 to 100°F
    • Controls 1 Turbo XE
    TH1-120 $179.00
  • Thermostat Control 2
    Thermostat Control 2

    If your main interest is evaporative cooling

    These watertight thermostats will provide accurate measurement of the temperature, automatically controlling your Turbo XE Fan(s) at approximately 3°F above and below your desired set-point.

    • Effective Range: 40 to 100°F
    • Controls up to 2 Turbo XEs
    TH2-120 $279.00
  • Two-Stage Control
    Two-Stage Control

    Environmental control for high humidity applications and changing temperature conditions

    Designed for the greenhouse propagator, these systems can be set to automatically increase fog output when ventilation occurs. Stage one fogging output is controlled by the Timer and Stage two (increase fogging output) is controlled by the Thermostat.

    • 24-hour rain-tight time clock with adjustable cycles as short as 1 hour and two sets of on/off trippers provided
    • Controls up to two Turbo XEs
    2SC-120 $519.00
  • Economy Traveling Floor Stand

    If securing Turbo XE Fans overhead is not practical, this floor stand allows for an affordable solution. Capable of stationary or oscillating set-ups. Stands are constructed of heavy-wall pipe and treated lumber.

    • Fully adjustable boom
    • 10” molded wheels
    XE-100 $175.00
  • Wall Mount

    The Wall Mount Support provides adjustable height along its 30" vertical length. The cross-support extends 21", accommodating for 360° sweep rotation.

    • Supplied with Lag bolts and masonry anchors
    XE-W $78.00
  • Ceiling Mount

    Support has 36" horizontal length

    • Supplied with Lag bolts
    XE-C $48.00
  • Temperature-Humidity Meter

    Ideal for applications below 95% Relative Humidity

    This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays
    in °F or °C.

    • Temperature range/accuracy: 32 to 122°F (0 to 50°C)/1.8°F (1°C)
    • Humidity range/accuracy: 20 to 95%RH /3%
    • Response time: 60 seconds
    • Power source: CR2032 Lithium-ion battery (included)
    CP-205 $56.50
  • Temperature-Humidity Meter w/ Dew Point

    Ideal for applications up to 100% Relative Humidity

    This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient and dew point temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays in °F or °C.

    • Temperature range/accuracy: -4 to 122°F (-20 to 50°C)/1.8°F (1°C)
    • Humidity range/accuracy: 0 to 100%RH /3%
    • Response time: 60 seconds
    • Power source: Two "AAA" batteries (included)
    CP-301 $112.00
  • Turbo XE Water Solenoid

    Control water flow, electrically

    1. Use with preexisting control systems.
      Connect directly to the same power supply to automate water flow (on/off) in conjunction with the fan.
    2. Safeguard against power outage.
      If operating fogging units manually (no control system), a water solenoid installed in the unit’s water supply line will shut off water flow in the event of a power outage.
    • 8′ cord w/ liquid-tight connector
    • NEMA 4 Water-tight components
    • Swivel hose x 3/8″ OD tube connection
    SVC-120 $120.00