Turbo XE (60 Hz) Domestic Voltage

Turbo XE Fog Fan

Turbo XE fogging fans offer superior handling in a variety of commercial and industrial applications involving humidification, evaporative cooling or chemical atomization. Use our Sizing Calculator to determine the number of units, horse power and flowmeter size(s) needed for your specific application.

Turbo XEs produce billions of tiny, fog-like particles combined with powerful air-flow. The Turbo XE misting system utilizes centrifugal force atomization to achieve reliable operation without the requirement of nozzles, high pressure pumps, compressed air or filtration. This method usually results in increased equipment reliability, as well as significant energy savings over other processes under equal conditions.

These fog fans may be operated manually or automated; running air only or fogging fluid. The fogging output is adjustable and controlled by a flowmeter's needle valve. Flowmeters (see features below) require a water supply of 10 to 100 PSI; however, for special applications, flowmeters can be bypassed and fans gravity-fed.

Flowmeter Panels

Every Turbo XE atomizing fan comes with a choice of flowmeter panels. To maintain reliability, flowmeters need to be operated at 1/3 of their flow rate range or higher. The flowmeter size should be chosen according to the requirements of your application. Use the reference chart below to help select the right product, or use our Website‘s Sizing Calculator.

Examples based using the Turbo XE-2000 Fog Fan:

4-34 GPH

2-24 GPH

1-11 GPH

(20-300 ccm)
.3-5 GPH

(10-110 ccm)
.1-2 GPH

(5-50 ccm)
.1-1 GPH

Horticulture

Evaporative Cooling

Concrete Curing

Mushrooms

Produce Storage

Warehouse

Mfg Plant Humidification

Wood/Lumber

Wine Storage

Textile Plant Humidification

Mfg. Dust/Static

Odor Control Odor Control

The Turbo XE fogger comes standard equipped with:

Baldor® Wash-down-duty™ motor, teal green housing color, 12' power cord, 20' water line and 16' of drainage line. Utility line lengths may be customized during the order process.

Dimensions:

Diameter 20.5 in / 52 cm

Width 17.5 in / 44.5 cm

Height 22.5 in / 57 cm

Approximate Weight:

46 lbs / 20.8 kg

Propulsion Distance:

30-35 ft / 10-11 m

Noise @ 10 ft distance:

1 hp units, 76-79 dB(A)

1/2 hp units, 74-77 dB(A)

1/4 hp units, 70-73 dB(A)

Average Particle Size:

5-10 microns @ low volume

25 microns @ mid volume

35 microns @ high volume

Operation:

Continuous duty capability

Environment:

Endures temperatures from
31° to 160° F

Indoors / outdoors

Humidity to 100% RH

UV stabilized & impact resistant

  • Pocket Thermohygrometer

    This precision hand-held thermo/hygrometer is ideal for monitoring Humidity and Temperature levels. Accuracy ±3% of measurement with a fast 60 sec. response time.

    • Humidity: 0 to 100% range
    • Displays in °C or °F
    CP-301 $208.25
  • Turbo XE Oscillator

    Increase Coverage & Circulation

    The sweeping action of a Turbo XE Fan not only alleviates droplet collisions and fallout, but also enhances air circulation. The dwell-free movement provides for uniform coverage patterns up to 70 feet in diameter. The steady, continuous movement allows the operator to fog at higher output levels over a stationary unit operating under equal conditions, resulting in less fall-out and improved dryness underneath the fog pattern.

    • Adj. sweeps from 15 - 360
    • 60/50Hz 1 Phase
    XE-360 $366.40
  • Molded Floor Stand

    Easy Set-up Floor Stand

    If securing Turbo XE Fans overhead is not practical, this floor stand allows quick, easy set-up. Capable of stationary or oscillating set-ups. Stands are molded of heavy-wall, polyethylene reinforced material.

    • Quick assembly
    • Five height settings
    • Sleek, sturdy design

    Only in Black

    XE-110 $378.40
  • Humidistat Control
    Humidistat Control

    Complete environmental control

    If your humidity requirement is 80% or less, the Humidistat Control is the best choice for control of your environment. When the humidity level drops to about 6% below the set point, the humidistat will activate the Turbo XE Fan to replenish the loss of humidity. If ventilation occurs, humidity can be restored with evaporative cooling.

    • Capable of operating up to two 1 HP Turbo XEs
    H2-120 $370.13
  • Timer Control
    Timer Control

    Excellent for controlling long operation cycles

    Often the choice for applications when humidity is desired above 80%. Using extended cycle operation, the operator can attempt to control humidity levels utilizing manual control of the flowmeter panel.

    Time cycles as short as 1 hour. Two sets of on/off trippers provided.

    • Capable of operating up to two 1 HP units
    TC-120 $288.75
  • Thermostat Control 1
    Thermostat Control 1

    If your main interest is evaporative cooling

    These watertight thermostats will provide accurate measurement of the temperature, automatically controlling your Turbo XE Fan(s) at approximately 3°F above and below your desired set-point.

    • Effective Range: 40 to 100°F
    • Controls 1 Turbo XE
    TH1-120 $273.88
  • Thermostat Control 2
    Thermostat Control 2

    If your main interest is evaporative cooling

    These watertight thermostats will provide accurate measurement of the temperature, automatically controlling your Turbo XE Fan(s) at approximately 3°F above and below your desired set-point.

    • Effective Range: 40 to 100°F
    • Controls up to 2 Turbo XEs
    TH2-120 $304.50
  • Two-Stage Control
    Two-Stage Control

    Environmental control for high humidity applications and changing temperature conditions

    Designed for the greenhouse propagator, these systems can be set to automatically increase fog output when ventilation occurs. Stage one fogging output is controlled by the Timer and Stage two (increase fogging output) is controlled by the Thermostat.

    • 24-hour rain-tight time clock with adjustable cycles as short as 1 hour and two sets of on/off trippers provided
    • Capable of operating up to two 1 HP units
    2SC-120 $598.50
  • Economy Traveling Floor Stand

    If securing Turbo XE Fans overhead is not practical, this floor stand allows for an affordable solution. Capable of stationary or oscillating set-ups. Stands are constructed of heavy-wall pipe and treated lumber.

    • Fully adjustable boom
    • 10” molded wheels
    XE-100 $216.80
  • Wall Mount

    The Wall Mount Support provides adjustable height along its 30" vertical length. The cross-support extends 21", accommodating for 360° sweep rotation.

    • Supplied with Lag bolts and masonry anchors
    XE-W $82.40
  • Ceiling Mount

    Support has 36" horizontal length

    • Supplied with Lag bolts
    XE-C $63.20

Made in U.S.A.